Modelling a bicycle brake or derailleur cable terminal for 3D printing

Date: 11/01/2024 Auteur: Sicami

 

Creating a simple model for 3D printing with OpenSCAD 

We are going to perform a simple example of using 3D modeling techniques for subsequent 3D printing.


We will manufacture a terminal for brake cable and / or change of bicycle.


For modeling we will use OpenSCAD, free software for the creation of 3D solid objects because it is free to use and also allows parametric design, so it will be possible to later modify the dimensions to adapt the model to each particular need.

 

OpenSCAD download link: https://openscad.org/

 

We begin by drawing up a sketch that represents our initial idea.

Boceto

Already in openSCAD, let's start with the base drawing a cylinder of diameter 5.5 mm. and height of 2 mm.

cylinder(d=5.5, h=2, $fn=100);

Modelo terminal

The variable parameter $fn is used to indicate the number of segments that will form the base circle of the figure and therefore the number of faces of the cylinder. This would be the result for a value $fn = 10

Modelo terminal
For the sake of simplicity we are going to drill the bore or perforation in this first module of the object.

The bore will be another cylinder of the same or greater height and diameter of the bore:

cylinder(d=1.9, h=3, $fn=100);

In the following figure it is represented in red color and with a height of 3 mm. for better visualization.

Modelo terminal

But now what we have are two overlapping cylinders, so that the second cylinder is the perforation of the first one we will use the modifier  “difference()” that will make the difference between the first and second elements indicated:

difference(){

cylinder(d=5.5, h=2, $fn=100);

cylinder(d=1.9, h=3, $fn=100);

}

Modelo terminal

We are going to create the second cylinder or main body of the object, its diameter will be 4 mm. and its length will be 13 mm.

cylinder(d=4, h=13, $fn=1000);

To make its initial position coincide with the upper face of the base cylinder, we will move it 2 mm along the vertical axis "Z" using the transformation “translate ([x, y, z])”:

translate ([0, 0, 2])

cylinder(d=4, h=13, $fn=1000);

Modelo terminal

We will drill the hole as we saw before, although in this case we do not want it to go through its entire length, so its length will be less than 1 millimeter.

Modelo terminal

difference(){

translate([0,0,2]);

cylinder(d=4, h=13, $fn=1000);

cylinder(d=1.9, h=12, $fn=1000);

}

Modelo terminal

Now all that remains is the upper chamfering. In this case we will do it as a third element, again we will use a cylinder, but we will define a smaller diameter for the upper face. We will use again the primitive "cylinder" to create a cylinder of height h=1, lower diameter d1=4 and upper diameter d2 =2.

cylinder(h=1, d1=4, d2 = 2, $fn=100);

Modelo terminal

And again we move it to its correct position at the upper end of the terminal.

translate([0,0,15]);

cylinder(h=1, d1=4, d2 = 2, $fn=100);

Modelo terminal

The final result, including the complete code will be:

difference(){

cylinder(d=5.5, h=2, $fn=100);

cylinder(d=1.9, h=3, $fn=100);

}

difference(){

translate([0,0,2])

cylinder(d=4, h=13, $fn=1000);

cylinder(d=1.9, h=12, $fn=1000);

}

translate([0,0,15])

cylinder(h=1, d1=4, d2 = 2, $fn=100);

Modelo terminal
 
Modelo terminal

Then we will render it (F6) and export it for 3D printing, in our case in .STL format. And this will be the final result once printed.

Foto terminal cable
As they cannot be crushed, like traditional metallic terminals, it is recommended that the inner diameter be well adjusted to the cable and inserted by turning it in the direction of the stranding of the cable wires to avoid fraying.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Sicami Tracks - Début